Have Question?

Everything about VASARI The Natural Wall Plaster

- plaster is the premium replacement for paint
- made naturally with natural products only
- probably the easiest plaster on the planet to apply
- very easy to maintain and repair
- very versatile in look and feel. Each of our products are extremely flexible in technique and aesthetics
- very affordable
- long lasting

- lime based plasters are unequivocally the most beautiful wall finishes on the planet
- lasts for very very long time and improves with age
- eco-friendly, zero VOC, hypo- allergenic, no off-gassing, absorbs carbon dioxide, naturally resistant to mold and expels excess humidity
- versatile in any texture, sheen or color
- breathable
- filters the air
- crack resistant
- fade resistant
- the ultimate replacement for paint

All of our products are made with lime, powdered marble, crushed limestone, earth based pigments, natural polymers, pozzolans, and a few more magical things.
- Carrera Thicker plaster made with most and larger sand particles. Can be applied textured, matte, smooth or slightly polish for subtle variation and movement of color.
- Marmorino Thinner plaster with a less and smaller sand particles. Applied matte or medium or polished for more variation and movement of color.
- Stucco Exterior finish coat. Just like our Carrera plaster except made for exteriors, Can be applied textured or smooth.
- Veneziano Contains no sand and is applied in thin coats. It can be applied very subtle and matte or very polished and dramatic like marble.
- Wetskim lime based skim coat for the base of interior walls.

Yes. With proper guidance we will advice you the best solutions for shower stalls and semi-exteriors.

Latex or acrylic water based primer? Yes. With Wetskim the result will be better . Plaster adheres much better and easier to work when it’s being ‘Wetskim’
- Latex or acrylic water based paint? Yes. You usually don't need to prime it unless it's a high sheen paint.
- Cement and concrete? Yes, but you should probably use our Wetskim first.
- Gypsum plaster? You should use our Wetskim it first.
- Drywall? Prime everything well with a good primer.
- Fiberglass board? Yes, but the seams are gypsum, so prime it anyway. You want to have even suction everywhere.
- Cement board? Yes, unless the seams are gypsum based. Remember!
- Magnesium board? Yes, but the seams are gypsum, so prime it anyway.
- Oil based paint or primer? No. Oil based has to be removed first before plaster.
- Wallpaper? We recommend to remove wallpaper as wallpaper doesn’t last.

For a professional job, use a professional. But, for the most part, it's pretty easy for most techniques. Most people need a 20 minute learning curve. Just watch your uniformity, edges and trowel marks and you'll have a beautiful finish. Or just watch our videos. Always make a sample board first and start in the smallest area until you get the hang of it.

Usually with a trowel. Usually in 2 coats. Time can be greatly accelerated by spraying or sometimes rolling on the first coat (then back-trowel it).

Yes, very. It's zero VOC, hypo- allergenic, doesn't off-gas, absorbs carbon dioxide, naturally resistant to mold and expels excess humidity. You'll hardly smell a thing when you're applying it. Very dark colors might sometimes have an odor to them.

Don't find the answer to your question?

Ask us your question and we will answer to you.

COPYRIGHT @ 2024 Vasari Asia Sdn. Bhd. 201901008543 (1317871-H) ALL RIGHTS RESERVED. POWERED BY ETC WEB DESIGN.